Built between 2006 and 2008 as a one-off to an in-house design by Poole-based specialists Norco GRP Ltd, this unique vessel is now available for private sale for the first time. Built on a 28' Arrowcraft hull and powered by twin Yanmar 240HP diesel inboard engines on shafts, each with less than 90 hours use. Within her 29' legnth, she includes a spacious cockpit with seating for 8 crew, and below decks there are two large & airy cabins with 6' standing headroom throughout. The forward cabin has 2 berths either side of a large high-gloss wood table which drops to form a large double berth. Galley with hot & cold pressurised water, full domestic size 4-burner gas hob and large fridge below. The aft cabin is much larger than others found in similar sized boats, and the heads compartment includes a full height shower. Professionally cleaned inside and out in May 2014 and with fresh antifoul and anodes, she is certainly a unique boat. Video tour available at www.harbouryachts.co.uk.
Raymarine 54E VHF radio. Raymarine DS/500x depth sounder & fishfinder. Ritchie Powerdamp compass.
Yanmar 4LHA-STP inboard diesel engines, 240HP each, 50 hour service carried out in June 2012 and serviced again at 86 hours total running time in March 2015. ZF Marine hydraulic gearboxes. Cruising speed 30-35 knots, top speed 40 knots. Hydraulic steering. Trim tabs. Fixed 16" x 22 props.
Sleeps 4 in two cabins, with another 2 in the cockpit if required. 6' standing headroom throughout. Forward cabin has vee-berth seating around high-gloss varnished saloon table. Heads compartment to port has a full height shower, pressurised H&C water (water heated by calorifier and 240v immersion), and electric flush Vetus toilet with macerator and holding tank. The galley incorporates a 4-burner gas hob, Isotherm fridge, and s/s sink. The after cabin has standing headroom to the port side and a spacious double berth. Sony 50W stereo with 6x CD changer and 4 speakers.
Vinyl teak laid cockpit and stern boarding platform. Clipper electric anchor windlass and delta anchor.
NORCO GRP Ltd is a privately owned business which was established in 1985 in Poole, Dorset. The company employs more than 150 people and specialises in GRP/composite mouldings for end users all over the world including major boatbuilders such as Sunseeker, Princess and Oyster Yachts. The company would be pleased to provided a tour of their facilities to interested potential buyers of this vessel.