• Motor Boat
  • Sailboat
  • Inflatable & RIB
  • Engine
  • Small Boat
  • Jetboat and Jetski
  • Berth
  • Trailer
    All categories
    • All categories
    • Motor Boat
    • Sailboat
    • Inflatable & RIB
    • Engine
    • Small Boat
    • Jetboat and Jetski
    • Berth
    • Trailer
    £ 1,288,650
    listed price: 1.500.000 €

    Renaissance Yachts - USA - Whitefin

    Add This Ad To Your Favorites
    This feature requires you to be logged on boatshop24

    You can login to your account or create a new account.
    Send this classified to a friend!
    Fill in the form below

    "Your name" must be filled.
    "Your email" must be filled.
    "friend name" must be filled.
    "friend email" must be filled.
    Please select the I'm not a robot box.
    your name:
    your email:
    friend name:
    friend email:

    Malta flag, commercial vessel. Whitefin was given a complete refitting in may 2015 by her new owner

    Construction Material : Hull is made of four layers of Canadian pitch pine
    glued with West System epoxy resin, the inner
    and the outer ones are longitudinal,
    intermediates are laid down at +/-45°. During
    the refit the hull was softly sanded outside and
    other three coats of West system resin were
    applied on the impeccably maintained original
    layer. No planks were changed because wood
    was in a perfect condition
    Hull and deck structures are made of cold
    moulded acajou.
    During the 2002 main refit several through hull
    penetration were structurally closed to make the
    boat safer, all valves were replaced.
    Deck is made of crossed layers of wood, finished
    with teak planks (18 mm).
    Rudder : Rudder is made in sandwich with glass-kevlar
    outer skin. The rudder stock is in light alloy
    hinged on a deepskeg.
    Steering system : The steering system is direct through a cardan
    coupling. Quadrant is in steel.
    Keel : Fin and bulb are made in cast lead over an
    internal steel structure. The keel is fitted to the
    hull by mean of bolts up to the top face of the
    keel floors.
    Propeller : N° 1 Max Prop 32”; shaft line of 50 mm stainless
    steel Aisi 630.
    Length: 27,43m
    Beam: 6,28m
    Draft: 3,10m
    Displacement: 72000 Kg
    Engine brand: Cummins Engine model: 6 BTA 5.9 Engine power: 1 x 335 hp Engine hours: 2200 Max speed: 11.5 knots Cruising speed: 10 knots Propeller Max Prop 32Shaft elastic coupling : Centa Aquadrive Last Cummins check : 02-2005. Transmission: Shaft line in stainless steel Aisi 630; 50 mm in diameter. Max Prop propeller, three blades 32” Engine year: 2001
    The fresh water system is made of two stainless steel tank of 1300 l of total capacity.
    Tanks are fitted with electrical gauges. Water feeding is ensured by a G&R autoclave through closed circuit, one for fresh and one for hot water. Piping is made of polyethilene for alimentary use (Accorn) and water is heated in an electrical unit (80l, 220V, 1500W) fitted with teleheating from the engine.
    Fresh water is produced on board by a Tecnicomar watermaker (180 l/h)
    Water intake is in a recess on deck fitted with a metallic plug.

    Water from sinks and showers are discharged in three 40 l grey tanks with automatic

    Toilets are electrical from Tecma feeding a stainless steel tank of 200l. Tank can be pumped directly overboard or sucked from a shore system.

    Fuel tank in stainless steel, fitted in the engine room, has a capacity of 2000 l. The tank is fitted with both electrical and optical gauge. Piping is in copper and certified reinforced rubber. Two Racor filters are fitted on both lines, engine (KWA50) and generator(KWA20).
    Master cabin with bathroom
    VIP cabin with french bed and private bathroom
    N.3 guest cabins, with twin beds and bathrooms
    Crew cabin with separated entrance
    Saloon with C-shaped sofa
    Spacious kitchen with stove, oven, fridge, double sink
    Internal in good conditions
    Navigation equipment
    Complete Furuno and Raymarine instruments:
    - VHF
    - Radar Raytheon Pathfinder
    - GPS Furuno
    - Autopilot Raymarine ST 7001+
    - SSB
    Magnetic compasses: n.1 Danforth + n.2 Riviera White Star
    Onan generator 22 KW
    Electric boiler
    Air conditioning
    Holding tanks
    Bilge pump
    HiFi Stereo
    DVD player
    Water maker
    Washing machine
    Anchor is a stainless steel CQR 75 kg. A secondary anchor Danforth 30 Kg with 15 m of chain and 100 m of rope
    The mooring winch is a Lewmar 5 kW, the chain, 100 m of 12 mm, is stored in the forepeak
    Battery charger: N.1 x 100 A, 24 Volt Mastervolt (for system batteries)
    Electrical system: 220 Volt AC 50 Hz, 12/24 Volt DC Generator : ONAN 22.5 MDKAF 22 Kw/1500 rpm, (working time 300h)
    N.1 120 Ah Bosh alternator fitted on the main engine (to recharge the 2 batteries banks).
    N.1 Inverter Mastervolt 24/1500
    N.1 Alternator x 80 Ah, on main engine (to recharge the starting battery).
    Shore power connection : N° 1 x 64 A
    The bilge system has four branches to suck water from lazarette, engine room, mast/saloon and forepeak. Bilge pump is a self priming G&R ACM-BT connected in parallel with the firefighting pump which can work as a back-up or at the same time.
    A submersible automatic pump is fitted in each bilge compartment, two of these are also possibile to be pumped by two manual pumps.
    The boat is fitted with an electrical power-pack with five lines to trim outhaul, backstay, innerforestay and both runners. The system made by Medtec (Wally Yachts) has a manual back-up. The Reckman furler works with an indipendent power-pack.
    The light alloy fractioned mast is based on the keel floors.
    MAST : Proctor in light alloy with three flat set of spreaders and jumpers. The rig is fractioned 7/8 with structural backstay and runners.
    STANDING RIGGING: Discontinuous stainless steel (Nitronic 50) rod.
    Backstay and runners are in aramid fibers.
    RUNNING RIGGING: All running rigging is in Dyneema.
    BOOM: Proctor in light alloy (park avenue)
    RUNNERS WINCHES: N.2 Harken 980 self tailing 2 speeds
    PRIMARY WINCHES: N.2 Harken 1120 self tailing 3 speeds electrical.
    MAIN SAIL WINCHES: N.2 Harken 980 self tailing 3 speeds electrical.
    MAINSAIL TRAVELLER WINCHES: N.2 Barient 36 self tailing 2 speeds.
    STAYSAIL WINCHES: N.2 Barient 737 self tailing 3 speeds.
    HALYARDS WINCHES: N.4 Barient self tailing 2 speeds.
    The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. 5% plus VAT commission will be charged to the buyer. Mediazione del 5% + IVA a carico del'acquirente.
    £ 1,288,650
    Sales status:available
    Manufacturer:Renaissance Yachts - USA
    Year built:1983
    Length (m):27.43
    Yachtstudio Ltd.
    Yachtstudio Ltd.