• Motor Boat
  • Sailboat
  • Inflatable & RIB
  • Engine
  • Small Boat
  • Jetboat and Jetski
  • Berth
  • Trailer
    All categories
    • All categories
    • Motor Boat
    • Sailboat
    • Inflatable & RIB
    • Engine
    • Small Boat
    • Jetboat and Jetski
    • Berth
    • Trailer
    home / Motor Boat
    Advert expired!
    BS5061F42
    Sunseeker - 80 Sport Yacht

    LOA: 24,9 m
    Beam: 6,09 m
    Draft: 1,96 m
    Dry Weight: 58.7 tons
    No. Cabins: 4+1 Crew
    No. Berths: 8+2 Crew
    No. Bathrooms/Heads: 3+1 Crew 
    Fuel Tanks Capacity: 6000 lit
    Water Tanks Capacity:1185 lit
    Holding Tanks Capacity: 435 lit 
    Engines: 2 x MAN V12 1800 Hp
    Maximum speed up to 30 knots
    Cruising speed 23 knots


    Equipment:
    - Air Conditioning - Upgraded to Tropical specification.
    - Carbon fibre and polished stainless steel ensign staff.
    - Pair of Retractable Cleats for tender on port and stbd corners of
    platform.
    - Anchor Winch spares kit for single standard winch.
    - Parasol with offset post at foredeck with two sockets and dedicated
    stowage.
    - Covers Package for sun beds, seating and tables.
    - Oil change system for engines gearboxes and generators.
    - Stern thruster system - Sleipner SP300HYP.
    - Portable air compressor unit.
    - Standby fresh water pump.
    - Line Voltage Regulator.
    - U-Line Wine cooler.
    - CCTV with 3 Cameras: 2 x Infra-red located in the engine room plus 1 x
    camera located on the radar arch facing aft. Image to be displayed on
    Nav screens at the helm.
    - Stern Docking Flood Lights with stainless steel bezels.
    - Underwater lights - Aqualuma LED wide angle x 8.
    - Air Horn upgraded to twin Kahlenburg.
    - Aerial 2.4 metre Whip for FM Radio to match VHF Aerial on Radar arch.
    - Fixed engine control station located in aft cockpit.
    - Compass Swinging and adjustment with correction card.
    - Medium tinted film to side windows and sliding doors.
    - Manual 100% blackout blinds in the cabins.
    - Bedlinen Set of Egyptian cotton sheets for all guest cabins.
    • Air Conditioning air handlers upgraded to quieter running
    WhisperCool DC fans.
    • En Suite roof Panels to be Ivory Lacquer with a Mirror Parameter in
    Lieu of Standard
    • Saloon TV to be upgraded to the Samsung 55'' Ultra HD F9000
    Series on a Rise and Fall System in Lieu of Standard.
    • Simrad RS87 third station handset in the Crew Cabin.
    • Both Crew Cabins to have their own Fusion Stereo DVD player and
    TV.
    • Crew cabin to have 2 x Separate Cabins with a Single head in Lieu
    of Standard.
    • Cleats - Stern spring cleats located on the aft edge of the hull for
    stern mooring purposes.
    • Side mount stairway with hull fittings port and starboard.
    • Small round loose coffee table to be supplied for the Cockpit, this
    is to have a Stainless Base with Aztec Brown Avonite K3-7700
    Avonite Top.
    • Port Cockpit Wetbar Cabinets which are to house the Fridge with
    Vent Grooves cut out of GRP Doors.
    • Port Cockpit Wetbar to have a Sink and Tap and a Fridge behind a
    GRP Vented Door.
    • Teak Table "V" Groove with folding leaves on stainless steel legs in
    the Aft Cockpit.
    • 2 x AC 220volt sockets to be fitted in the Starboard side aft of
    garage for the future fitment of the Sea Bob Chargers.
    • Underfloor Heating required under Granite Flooring.
    • All Interior LED lighting Colour to be Warm White and all Exterior
    LED lighting to be White in colour.
    • LED down lighting to be fitted onto the underside of the Bimini.
    • An Additional Layer of Soundproofing to be applied on the Engine
    Room Bulkhead.
    • Fuel polishing system.
    • Water Maker HRO Seafari 221 lt per hour (SFC 1400-2) including
    commercial pre filter, freshwater flush and oil/water separator.
    • Galley Dishwasher is to be moved to the forward bulkhead.
    • Galley to be Open Plan as show on GA with no Inboard Bulkhead
    Inboard Aft Bulkhead to finish in line with the aft edge of the Fridge.
    • Galley Top Boxes on the forward bulkhead to finish in Line with the
    Port Side Stairs down from the Main Saloon.
    • Galley roof panels to be open as show on GA.
    • A Special Hot Water system ''Quooker'' to be fitted onto the Galley
    Sink. This hot water system is to have a separate tap fitted which
    will be connected direct to the ''Quooker'' System.
    • 2 x SeaBob cradles to be made with pins and deck sockets as done
    on 6341492. Both SeaBobs to be stored in the Starboard aft
    flooring of the garage on the flat section as far outboard as
    possible. 2 x additional sets of deck sockets to be supplied for
    dealer to fit onto the platform.
    • Interior Wood to be Tabu - Caleidolegno Grey B4.00.421 Gloss
    finish in Lieu of Standard.
    • Stairway handrail from Saloon to Lower Lobby are to have Handrails
    both side of Steps and they are to terminate on the First Step on
    both sides.
    • Lower Deck Layout to be the Larger Galley with Port Pullmans
    Option.
    • Main Deck Layout to be the Occasional Dining Option.
    • Navigation upgrade to Simrad Glass Bridge.
    - Simrad NSO processor x 2 with Simrad OP40 Controller.
    - Three x Hatteland 'System X' 19" Glass Bridge Displays - Two for
    navigation and one for monitoring.
    - Simrad TX010S High Definition digital open scanner radar 6ft 10kW
    - Simrad GS15 GPS Antenna
    - Simrad Autopilot system with control from QS80 Joystick fitted to
    helmsman's chair.
    - Simrad IS40 Multifunction Instruments x 2 - displaying navigation
    information, including autopilot display page.
    - Simrad RS87 VHF with DSC
    - Simrad AIS NAIS 300 Class B AIS Transponder system with integrated
    GPS receiver.
    • Dynamic Positioning System for station holding with ZF JMS.
    • Stainless Steel Upstand to be fitted in the centre of the console
    Oval section so you can store equipment in this area.
    • Both Helm seats backing to be in Shore Break Whistler Leather
    LVR226, the side and front of the seats are to be black leather with
    silver cross stitching. The back solid panels are to be in carbon fibre
    effect.
    • Main Helm Oval console panel chart box lid to be wrapped in
    Carbon Fibre with Clear Lacquer.
    • Either side of the Headboard to have a Black Lacquer Feature strip
    which will run up the aft bulkhead along the roof panel to the
    foreward bulkhead and run down the TV Feature Louvered Panel on
    the forward bulkhead.
    • Master State En Suite to have an upstand in Emperador Dark -
    Gloss Finish around the forward and aft bulkhead including the
    upstand under the shower door.
    • The Master State En Suite shower outer bulkhead from the window
    shelf to the floor only to be in Emperador Dark - Gloss Finish. The
    forward and aft bulkhead in the shower is to be in the Filo Oro
    Laminam.
    • Portside Loose Arm Chairs x 2 to be pushed outboard as much as
    possible. Cabinetry not required to be so deep as shown on the GA.
    • Saloon Seating to have 1 x Three Seater Sofa on the Outboard Side
    of Saloon, 1 x 2 Seater Sofa on the Aft End of Saloon and 1 x 2
    Seater Sofa on the Forward End of the Saloon.
    • Saloon Table is to be on an a double Square leg Electric Vertical
    Rise and fall Mechanism, it is also to have a Slider Mechanism
    fitted so the table to be moved closer to the Saloon outboard
    seating when used for Dining purposes. This table is to be in
    Black Lacquer Gloss Finish with 2 x Folding Leafs on either end,
    When this table is in the Closed Position it is to have the same
    Stainless Detailing on top as the Standard 80 Sport Yacht Coffee
    Table. When the Table is in its open position it is to be in Black
    Lacquer Gloss Finish with No Stainless Detailing. The Table Base
    is to be recessed into the Saloon flooring. The size of this table is
    to be slightly wider than what we fitted on 9061480 so when the
    table is pushed outboard into its dining position the inboard
    edge of the table is to be in line with the inboard edge of the aft
    sofa.
    • 2 x Lounge Chairs to be supplied for the port side saloon area in
    front of the TV. Chairs TBC. Small table in the centre of these two
    chairs to be Black Lacquer Gloss Finish with the same stainless
    detailing as on Dining Table.
    • Port Saloon Aft TV cabinet to be extended aft slightly so it flows
    onto the outboard forward edge of the Low Level Side Cabinet.
    • Saloon Port Side Bar Unit to have the same Special Bar unit
    feature as done on 9061480 with the 68 Predator Stainless
    detailing on the front on the doors in Tabu Grey - Caleidolegno
    B4.00.421, Gloss finish. All the rest of the bar unit front either
    side of the feature are to be in Figured Anegre Gloss Finish.
    • Saloon Roof Feature panel to be made as Wide and as Long as
    possible. The Feature Centre panels are to be in a Diamond
    Shape and made out of Ivory Lacquer with No down lighting but
    they would still like the Rope lighting around the perimeter. The
    Feature Border panels are to be made out of Black Lacquer.
    • Special Saloon Lighting Feature Louvers to be is Stainless Steel in
    Lieu of Standard.
    • All Saloon Port and Starboard vertical column Louvers to be in
    Black Lacquer but the columns themselves are to be in Figured
    Anegre Gloss Finish.
    • Saloon Carpet inlay is to go from the Starboard side seating to the
    Port Side TV unit as shown on GA.
    • Electric BBQ grill on the Sports Bridge wet bar.
    • Flybridge to be the standard layout with both teak tables to be on
    manual rise and fall table legs. Both these tables are to have
    folding leaf's and sliders so the tables can be moved closer to
    seating. When the 2 tables are fully open they are to become one
    large dining table.
    • Sleipner Fin Stabilisation with stabilisation at rest as well as
    underway.
    • Twin Guest cabin option - Inboard berth moves out-board to create
    double berth.
    • Starboard En Suite forward Bulkhead either side of Vanity unit to be
    in Tabu Grey - Gloss Finish.
    • Special Marble to be used (Nero Portoro - Gloss Finish) in the
    Saloon, Galley and Starboard En Suite.
    • Cockpit wet bar doors to be in Teak.
    • Flybridge wet bar rap around middle feature to be in teak.
    • Cockpit port and starboard rope locker doors to be in teak in lieu of
    GRP.
    • Saloon carpet to be the same as what is fitted on the 115 Sport
    Yacht saloon carpet at the London Show.
    • Aft patio door to have a curtain and a window sheer, both have been
    noted on the specification.
    • Main saloon lamp to be located on forward bar top, as shown in GA,
    the small ribbon lamp, nickel 410mm high with a 16" oval putty silk
    shade in the same material as the other two table lamp shade are in.
    • VIP headboard to be 3D chequered board effect in a mix of 2
    materials as noted on spec. Grane to be vertical. All rectangles have
    the Grane material and all the squares have the velvet material.
    • VIP valence above headboard to have feature down lights to light up
    the head board.
    • Ralph Lauren materials for interior scatter cushions and Bedding.
    • Starboard guest cabin to have the reading light deleted and 2x wall
    lights fitted. Use the same wall lights as used on 9101480 Stbd
    guest cabin but the lamp shade is to be in honey satin 726.
    • Crew flooring to be esthec flooring, same colour as teak with black
    corking.
    • 2 x B&O speakers to be fitted on the inside of both port saloon
    columns, sub is to be fitted in the starboard saloon centre side
    cabin.
    • B&O saloon BEOsound 5 unit inboard of the port saloon centre
    column.
    • VIP, port and starboard cabin roof speaker recesses to have a
    stainless ring fitted for aesthetics reasons.
    • All port side saloon bar unit kicker to have rope lighting fitted, this is
    to be tucked out of view as much as possible.
    • 4 x Exterior Heirlooms Towels to be supplied in Stone colour for the
    centre and the Border to be in Midnight.
    • Separate Microwave and Oven to be fitted, the Microwave is to be
    fitted in one of the top lockers and an Oven is to be as large as
    possible and fitted below the Hob.
    • Supply loose the following Gillian Weir Throws: 1 x Cashmere Throw
    Size 130 x 220 cm with Silk Banding, 2'' Herringbone, Main Body
    in 133 Ceylon Yellow, Silk Border 87 Everest Grey. 1 x Cashmere
    Throw 130 x 180cm, 2'' Small Basket Weave, Main Body 129
    Vanilla New, Silk Border Vanila New. 1 x Plain Cashmere 130 x
    180cm, Colour 58 Sky, Tassel Option C. 1 x Cashmere Throw 130 x
    220cm, Tassel Option E, Plain weave detail, 139 Autum Glaze.
    • 8 x Interior Towels to be Ralph Lauren in Stone Colour in Lieu of
    standard.
    • Saloon, Master State and Exterior Area's to have B&O Audio
    System installed to consist of:
    - Saloon: Beosystem 4, 2 x Beolab 12 Speakers, Beolab 19 Sub-Woofer,
    Beolab 5 Master Head Unit, Beo 6 Remote with charger unit and Apple
    Airport Express.
    - Master State: Beo Vision 11 46", Beo 6 Remote with charger, Apple
    Airport Express.
    - Foredeck: 2 x 200mm Polypropylene Speaker running off an Ice power
    amplifier with Apple Airport Express and 1.5mm Audio jack socket.
    - Sport Bridge: 2 x 200mm Polypropylene Speaker with 1 x 8.2 Passive
    Subwoofer running off an Ice power amplifier with Apple Airport Express
    and 1.5mm Audio jack socket.
    - Cockpit: 2 x 200mm Polypropylene Speaker with 1 x 8.2 Passive
    Subwoofer running off an Ice power amplifier with Apple Airport Express
    and 1.5mm Audio jack socket.
    • Upgrade the Hob to an Induction 4 ring hob in Lieu of Standard.
    • Full Size Dishwasher to be fitted under the forward bar unit of the
    galley in Lieu of Standard.
    • Tender Williams 445 TJ.

     

    Disclaimer

    The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
    Category:Motor Boat
    Sales status:available
    Manufacturer:Sunseeker
    Model:80 Sport Yacht
    Currency:GBP
    Year built:2014
    Length:24 m
    Beam:6.09 m
    Condition:Used
    Sale:Trade
    Engine manufacturer:man
    KW:3600.0 kw
    Fuel Capacity:6000 liter
    Fresh water capacity:1200 liter
    No. of cabins:4
    WC & bathrooms:3
    No. of berths:8
    Registration details
    we're sorry, this ad is no longer available.
    Latest ads in the same category:
    Andere - Aquanaut 750, 2015 generalüberholt
    SubcategoryMotor BoatYear built1978
    Length7.5 mNo. of engines1
    HP33
    17new 
    £ 11,188
    VAT Incl. / Paid
    Post Marine - 53 Convertible
    SubcategoryMotor BoatYear built2005
    Length16.15 mNo. of engines -
    HP -
    The "Le Lo Lai" shows as nearly new. Very lightly fished and loaded with all of the right gear, including ...
    75new 
    £ 312,011
    Zeilschip Brigantijn Jantje 4033 - zeilschip, charter, brigantijn
    SubcategoryMotor BoatYear built1930
    Length28 mNo. of engines -
    HP -
    Zeebrief 6623/2010 2009/45 EC dagtrips 26 personen area A1
    new 
    £ 245,471
    VAT Incl. / Paid
    Pluut HK 60 1601 - zeiler
    SubcategoryMotor BoatYear built1941
    Length12 mNo. of engines -
    HP -
    new 
    £ 51,678
    VAT Incl. / Paid
    Kotter Osmani 2494 - varend woonschip
    SubcategoryMotor BoatYear built1946
    Length18.9 mNo. of engines -
    HP -
    Varend woonschip, van alle gemakken voorzien. Motor in 2003 geplaatst.. Indeling: stuurhuis, salon, kombuis met ...
    new 
    £ 171,399
    VAT Incl. / Paid
    ALMISSANI d.o.o.
    ALMISSANI d.o.o.