+385 98 260039
New low price at inquire.
The class standards used are those of Det Norske Veritas, assigning the brand:
1A1, Inspection Vessel, Ice 1C, E0, COMF-V(1).
A vessel that is specially prepared both for the fight against pollution and as maritime rescue and control of fishing bank areas.
9 + 2
An integrated bridge system for navigation is fitted, with all equipment designed for recessed mounting in "cockpit” style bridge consoles, including the bridge wing manoeuvring stands and overhead ceiling consoles. Following navigation devices are integrated in navigation system (NACOS):
2 of Radars, one Multipilot and one Chartradar
1 of Chartpilot (ECDIS)
1 of Conningpilot
1 of Trackpilot
1 of Gyro compass with integrated GPS Gyro
1 of Speedlog
1 of Echosounder
1 of Navigation DGPS
1 of AIS
Gyro Compass and Autopilot
- Gyro / GPS Gyro Compass (automatic correction for course and speed)
- Gyro repeaters at bridge wings and steering gear room
- Steering repeater
- Bearing repeaters on top of wheelhouse.
- Magnetic compass and fluxgate
- Magnet compass repeater with synchronic-output to autopilot
Voyage Data Recorder (VDR)
A voyage data recorder (VDR) is installed. The following information is recorded over a period of 24 hours or according to rules
Propeller and Shafting
The Vessel is provided with two (2) off four-bladed, fixed pitch propellers of NIALBR.
Propeller Dia. 2700mm
Propeller rpm 262 rpm
The propulsion/propeller control has been supplied by Rexroth (Bosh Group) type Marex OS II remote control system. There, 5 control stations are arranged: one on conning station forward wheelhouse console, two wing and one aft consoles of the Wheelhouse, and one on ECR.
Bow and Stern Thrusters
The Vessels stern and bow thrusters are rim drive supplied by Brunvoll with the following characteristics:
The Vessel is equipped with Brown Brothers Aquarius series folding fin stabilisers model Aquarius 25/2.05m² fin
TRIPLEX model KN-50/3.0/6.0//70/30/20.
Lifting capacity winch on 10 m radius 3.000 kg
Lifting capacity on 6m radius 6.000 mm
Anchor Windlasses and Chain Stoppers
One off horizontal anchor winch maker Rapp Hydema model AW-28 serial No 6234 has been supplied and installed on suitable and approved by the Owner and Class DNV
The Vessel is classed for worldwide unrestricted sea-going service by Det Norske Veritas (DNV)
Proper certifications have been issued for the above.
It has two fixed pitch 4-blade propellers in NIALBR, 2700mm turning to 262rpm. For its control mounts REXROTH system (BOSCH GROUP) type MAREX OS II with multiple control consoles.
The B5J 500LC4-690V drive engines have been supplied by Rolls-Royce Marine.
Propulsion is diesel-electric from two Diesel MAN Holeby generators
6L21/31, from-1320kw to 100-rpm,
Two generators 1270-kw MRI 500LA6, and Un Diesel MAN Holeby type 8L21/32, from 8L21/32, from 1760-kw to 100-rpm and a 1960 kw MRI 630 MA6 generator.
Specifications provided for general information only. We cannot guarantee the correctness of given information or be liable for any inaccuracy or warrant the condition of vessels. All dimensions, capacities, speeds etc. are approximate. All information given is subject to fair, wear and tear. We therefore recommend clients to have vessels, specifications and information thoroughly checked and surveyed for accuracy by an independent qualified marine surveyor and purchase only subject to satisfied survey and sea trial. Vessels offered subject to still being for sale. Unless seller and purchaser have agreed this specification and information in signing in contract, we reserve the right to change specification, price etc. without prior notice. We are not responsible for the outcome of our publications and activities as result thereof.