Custom Security Vessel202136m

Construction:
Deadweight - 70 tons
Deck Load - 40.0 tons
Deck Strength - 2.0 tons/m2
Clear Deck Area - 80 m2

Engines:
Main Engines: 3 x Caterpillar C32 – 1,450 HP @ 2,300 rpm
Auxiliary Engines: 2 x 80 Kw Caterpillar, 440 volt 3 phase
Maximum Speed: 27 knots @ 2,300 rpm
Cruising Speed: 23 knots @ 2,000 rpm
Economic Speed: 14 knots @ 1,400 rpm

Fuel Consumption:
20 litres/hour at anchorage
465 litres/hour at economic speed
650 litres/hour at cruising speed
870 litres/hour at maximum speed

Range - 2,800 nautical miles (with 10% reserve)

Auxiliary Engines: 2 x 80 Kw Caterpillar, 440 volt 3 phase.
Batteries: 6 banks for main engines and generators, starting
with one emergency bank above weather deck.

Rotary colhersee switch to all.

Accommodation:
Air Conditioning: Split system with heating and cooling providing redundancy throughout the vessel.
Cabins: 4 x 2 man, 2 x 1, 1 x 4, 1 x 6 all with lockable drawers, reading lights, privacy curtains, vertical lockers, power outlets, ladders to upper bunks

Bow Thrusters: 80 HP Electric
Dive Compressor: Provision to fit on aft deck
Compressor: General unit 12 cfm for servicing equipment
Desalination Plant: 1 units producing 3,000 litres in 24 hours
Tools: Frontline tools, equipment and testing tools for
preventative maintenance and on-board breakdowns

Spares: On-board spares for preventative maintenance and
emergency backup

Fendering: Aircraft tyres
Stern Loading: Flush push up with landing area
Gangway: Portable aluminium gangway
Lines: Berthing, Towing Bridle, Heaving Line
Handling: Boat Hooks, Grapple with Lanyard
Deck Equipment: Recessed tie downs SWL 500 kgs
Mooring: Double Bit Bollards – 6 sets
Plating: 10.0 mm deck
Crew Transfers: Transom 1,350 mm from waterline
Rescue Area 1,600 mm from waterline
Bow 3,750 mm from waterline
Access to Water: Transom and side rescue zones
Anchor: 1 x 200 kgs
Anchor Winches: 1 x Electric 8 ton
Anchor Chain: 1 x 210 meter.
Pillar Deck Crane: 1.0 ton SWL at 6.0 m radius with hydraulic extension.
and winch.

Specifications provided for general information only. We cannot guarantee the correctness of given information or be liable for any inaccuracy or warrant the condition of vessels. All dimensions, capacities, speeds etc. are approximate. All information given is subject to fair, wear and tear. We therefore recommend clients to have vessels, specifications and information thoroughly checked and surveyed for accuracy by an independent qualified marine surveyor and purchase only subject to satisfied survey and sea trial. Vessels offered subject to still being for sale. Unless seller and purchaser have agreed this specification and information in signing in contract, we reserve the right to change specification, price etc. without prior notice. We are not responsible for the outcome of our publications and activities as result thereof.