• Motorboote
  • Segelboote
  • Schlauchboote
  • Motoren
  • Kleinboote
  • Jetboote
  • Liegeplatz
  • Anhänger
    Alle Kategorien
    • Alle Kategorien
    • Motorboote
    • Segelboote
    • Schlauchboote
    • Motoren
    • Kleinboote
    • Jetboote
    • Liegeplatz
    • Anhänger
    Bitte wählen Sie einen Ort aus der Auswahlliste
    795.000 €
    Jachtbouw Folmer - Perry 60
    Grabau International
    Profile page
    Anzeigenreferenz BS94007EC
    795.000 €
    MwSt. inkl.

    Jachtbouw Folmer - Perry 60 Sailboat

    SegelbooteVerfügbarJachtbouw FolmerPerry 60

    Quite possibly the smartest and most capable sailing yacht on the planet! Built in 2006 to take on all of the world’s oceans in absolutely safety and comfort, she still offers sparkling sailing performance. MARLIN is truly unique and an exciting opportunity now exists to take ownership of this sparkling red-hulled thoroughbred and embark on new world-girdling adventures.


    MARLIN is a Robert Perry designed aft cockpit pilots saloon cutter, built in aluminium by one of the very best names in the business – Yachtbouw Folmer in Holland. Launched in 2008, she was designed specifically for the most demanding blue water adventures in both hot and cold climates. With a multitude of collision bulkheads, she is virtually unsinkable, yet through clever design and design specification, she remains an enjoyable and nimble yacht to sail – something that is often left out when configuring expedition yachts such as this. Her owner reports that she will easily sail at up to 8 knots to windward, 8-9.5 knots on a reach and 7-8 knots downwind. She has also seen 16 knots on the log surfing in heavy seas.

    With over 60,000 miles under their belts, the current owners and their young family were most of the way through an audacious circumnavigation started in 1999, taking in Cape Horn, Antarctica, the Pacific and South Africa aboard their steel-hulled Scorpion II ‘IRON LADY’ before coming across MARLIN in Suriname in 2012.

    Since taking ownership of MARLIN, her new owners have comprehensively worked through every system and element of her structure to get her 100% ready for further adventures. They are now coming towards the end of their lifetime adventure so it is time to find MARLIN a new custodian to take full advantage of her enormous capabilities.


    MARLIN is an aluminium cutter-rigged pilothouse sloop equipped as Expedition Ship for high latitudes. The ship security certificate is issued by the SeeBG for worldwide travel. She has a moderate long keel with 8,000kgs of ballast and only just above two meters draft. She was built according to CE directives and Lloyd's standards in 2006 by the famous Folmer shipyard in the Netherlands.

    Five watertight sectors divide the 18m yacht: Forepeak, Master Cabin with watertight door made of aluminum, salon and aft berths, walk-in engine room, and lazarette for provisions and equipment.
    MARLIN is clearly distinct from the GRP charter boats through the use her internal space. Normally, a yacht of this size would be crammed with ten plus berths with the guests stacked like sardines like. MARLIN is actually designed for 6 people (although she will sleep up to 9 through use of settee berths in saloon and raised pilothouse). The engine compartment is separated from the living space which helps to insulate the cabin spaces from noise. Storage space in the forepeak, stern and deep bilge blank space for equipment and food sufficient for several weeks at sea.

    Marlin’s spacious pilot house has evolved during sailing as a central lounge for the on duty crew while on watch. In high latitudes it is warm here and it is protected from rain, snow, ice and cold. In the tropics, the pilot house provides the pilot house provides shadow and a pleasant breeze at anchor. When sailing you have a view of the horizon, which makes you forget seasickness.

    "Here one can dance!" Said one of my sailors when he came into MARLIN’s salon of MARLIN. With 2.1m headroom throughout, this is the centre of MARLIN’s community and where the food is eaten. Good food is writ large aboard MARLIN and her excellent working galley is testament to this. The lower saloon space is also where important work is done with two navigation tables, computers, communications equipment etc

    We have a heated closet where wet sailing clothes we dried. The aft heads is located amidships and acts as ideally-placed day heads plus services the two aft cabins which are equipped with a total of four berths. These cabins are the quietest place at sea. The master cabin is forward. This spacious cabin has an open forward hatch provides good ventilation in tropical travel zones. Forward of this is a an ensuite heads and a spacious shower in the forepeak..


    Robert Perry - We did two designs for this European client, and while both boats are very similar in size, over time his choice of preferred features changed. This boat is built with aluminium at the Jachtbouw Fulmer yard in the Netherlands. We worked closely with our Dutch contact Marinus Meijers to coordinate the conversion from our computer drawings to computer 3-D models to allow the entire structure to be nested and precut. The result to my eye is a work of art, all shiny in aluminium prior to sandblasting and highlighting the skill level that has made the Dutch aluminium yards famous.

    The target for this design was a fast, seakindly, all-weather offshore cruiser for a family of five.
    The hull form is narrow with an L/B of 3.52 and the D/L is 166. The sections show a soft, arclike shape with low wetted surface. The half angle of entry at the DWL is 15 degrees and at the deck it is 19
    degrees. The buttwater beam-to beam max number is 75 percent. Draft is moderate at 7 feet and the ballast is all internal. The keel fin is long to allow this boat to sit on its keel when hauled and provide sufficient volume to get the 19,000 of lead ballast down low in the fin along with batteries.

    The aluminum construction features a skin thickness of 7 millimeters to just above the DW where it
    increases to 8 millimeters. The keelshoe is 20 millimeters. This is very durable construction. It’s also easier to get a fair hull when you work with plating more than a quarterinch thick.

    Of course I like this boat. I designed it along with the help of Ben Souquet, my right-hand man, and Marinus Meijers. I think it may represent one of the nicest boats I have designed.


    RCD Status:
    MARLIN is CE certified for category A - OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above, and vessels largely self-sufficient.

    Hull, Deck & Superstructure Construction:
    MARLIN ' is built as a true seagoing yacht, equipped for the longest offshore voyages. She is built to a quality design, and constructed from first-dass materials throughout. Her round-bilge hull has been built to Lloyds standards by well renowned builder Folmer in Rijs -Holland.
    Seawater resistant Almg 4.5 Mn W28 aluminium construction.
    7mm thickness hull topsides
    8mm thickness beneath waterline
    20mm thickness at keel shoe
    Fully round bilge hull profile, epoxy filled, sanded, primed and spray-painted red with contrasting white waterline stripe and style-line
    Transverse hull framing
    Five watertight bulkheads – Ahead of forward shower, forward of saloon, aft of guest cabins, ahead of engine space, and aft of engine space.
    All stainless steel used in 304 of superior.
    The hull and decks, above the waterline are additionally insulated with PU foam.
    Raised pilothouse with laminated glass windows installed in an aluminium frame
    Raised bulwards with fairleads
    Super structure and decks painted off-white
    Decks and cockpit finished in contrasting non-slip

    Keel & Rudder:
    Fixed keel with internal lead ballast – Long in profile for directional stability at sea and also to allow drying out
    Aluminium rudder blade supported by full-depth skeg


    Engine & gearbox:
    Yanmar 4LHA-HTP four-stroke inline turbo-charged marine diesel engine producing 160hp (118kw) at 3,300rpm.
    ZF reverse reduction gearbox
    Mechanical single-lever throttle/gear control
    Indirect fresh water engine cooling via heat exchange
    The exhaust is water-cooled by injection of the cooling water from the engine.
    Twin fuel water separator / filters
    Natural aspiration for engine room ventilation
    Engine and gearbox flexibly mounted to reduce vibration
    The engine room is insulated with a flame retarding foam insulation.

    Maintenance & Performance:
    Engine hours: Approximately 3,100 hours as of Summer 2019
    Date of last engine service: June 2019
    Cruising speed: 6.6 knots @ 2,200 rpm
    Maximum speed: 9.9 knots @ 3,300 rpm
    Range: approx. 1,500 Nm

    Propulsion & Steering:
    Steering pedestal with hide-covered stainless steel helm wheel
    Mechanically operated Jefa steering system
    Emergency steering gear
    Stainless steel prop shaft
    Aquadrive coupling
    Water-lubricated Volve Penta shaft seal
    Maxprop 3-bladed feathering propellor


    Voltage systems:
    24v domestic system with 12v starting banks and 220vAC via generator, shore power or inverters

    Battery Banks:
    12vDC maintenance free engine start battery
    12vDC maintenance free generator start battery
    12vDC maintenance free dedicated battery for VHF/HF and AIS
    8x 12vDC Northstar AGM service batteries joined in parallel and series to supply 400ah @ 24v – New 2017
    Battery monitoring system at chart table

    2x VICTRON 70A Multilader and Inverse 3000W / 24V / 220V combi charger/inverters
    VICTRON DC/DC 24/12 V converter and battery charger for 12V battery subsystem - New 2013

    Northern Lights 4KW / 230V diesel generator - New 2018
    Generator hours – approx. 300 as of June 2019
    Date of last generator service – June 2019

    Energy Management:
    Superwind 350 / 24V Wind Generator - New 2013
    Four solar panels a 100 watts on the device carrier - New 2013

    High power 24v alternator 130Amp / h on main engine - New 2013
    BALMAR high-performance controllers - New 2013
    Separate 12v alternator for starter batteries engine and generator

    Other Electrical:
    Galvanic isolation transformer Shorepower
    220V in owner's cabin, saloon, chart table, kitchen, pilothouse, engine compartment


    Fresh Water:
    24vDC pressure system with accumulator tank for hot and cold fresh water.
    Calorifier tank for heating water via engine, via Webasto heating system or with 220vAC element from shorepower or generator

    ECHOTec watermaker 120L / h at 24V DC motor - New 2013
    New Membranes January 2019
    Watermaker hours: approx. 1,000 as of June 2019
    Date of last watermaker service June 2019

    Bilge Pumps:
    Each compartment has his own Hand Bilge pump
    Main manual Pump next to steering wheel. Changeable from Engine room, main salon, front cabin.
    Electrical Bilge pump front cabin with level switch
    Electrical Bilge pump centre salon with level switch
    Electrical Bilge pump grey water tank with level switch

    Gas System:
    Two 11kg LPG gas cylinders have their own gas box with cross and can be shut off from the outside and via shut-off adjacent to stove
    Gas system tested and certified - 2019

    Other Plumbing:
    Sea-chest with one through-hull skin fitting and seawater manifold system supplying engine, generator, heads, deckwash and spare.
    Ball-valve seacocks


    1,500 litres in two 750 litre fuel tanks, independently connected
    150 litre day tank taking feed from either fuel tank via manifold
    Manual tank gauges at chart table
    Sight gauge on sides of day tank
    Odour filter for tank vents

    Fresh Water:
    1,200 litres in two 600 litre tanks
    Manual water tank gauges at chart table
    Filters before outlet

    Holding Tanks:
    2x 110 litre blackwater holding tanks with deck outlet or drained overboard by gravity
    Blackwater tank level gauge
    Odour filter for blackwater tank
    Greywater holding tank fed via forward and aft collecting tanks

    Raymarine ST60 wind, speed, depth and log displays in cockpit with transducers
    Raymarine autopilot control head connected to Lecomble & Schmitt Linear Drive autopilot - New 2013
    Jefa rudder control
    Raymarine Tridata and Multidata displays at the chart table
    Furuno GP32 GPS at the helm, all data on Seatalk and NMEA networked with the BoardPC - New 2013
    Furuno Radar NAVNET
    On-board computer with a fixed 22-inch LED Monitor at the chart table. Worldwide maps under OpenCPN - New 2019
    Vesper Marine CLASS B AIS transponder. The AIS system also has a built-in anchor watch and serves the safety of the crew particularly as receiver for ELTs that are integrated at all lifejackets
    Binnacle steering compass

    Communications Equipment:
    ICOM M323 DSC VHF fixed installation - New 2013
    2x ICOM M72/73 VHF Portables - New 2013/19
    ICOM M802 with AT 140 and PACTOR 4, DR7800 - New 2013
    Shakespeare Whip Antenna 23 '- New 2013
    Iridium GO! Satellite phone/wifi hotspot system
    LunaWLANet High Gain WiFi Antenna for use in marinas and anchorages connected to WLAN router: 3G/4G Hotspot Router with 2 SIM Slots. NMEA Miniplexer N2K.


    Twin stainless steel sinks with hot & cold pressurised fresh water supply.
    Manual fresh water supply at galley
    Force 10 3-burner gimballed gas stove with oven & grill
    Fridge - 24vDC
    Freezer – 24vDC
    Washing machine

    Electric heads in forward heads compartment
    Manual heads in aft heads compartment.
    Hot & cold showers

    Heating & Ventilation:
    Webasto 9kw diesel-fired central hot water heating installed in engine room- New 2013 equipped and radiators in the wet areas plus saloon radiator installed 2014
    24vDC fans.
    Ventilation consisting of opening skylights, dorade ventilators and portlights.

    12v bulkheads lighting throughout with ample overhead lights and reading lights at settees and berths.
    Warm LED lighting around saloon table
    Lights over work area in galley.
    Chart lamp in navigation area.

    CD/Radio with stereo speakers in main saloon, plus further independent system for cockpit.


    Summary of Accommodation:
    Up to nine berths in three dedicated sleeping cabins with master cabin forward and two aft guest cabins. Ensuite heads for master cabin and shared heads for aft cabins and day-heads usage. Lower saloon with occasional settee berth, galley and chart table areas. Raised pilothouse area with seating/occasional berths and 360 degree outward vision.

    Accommodation Finish:
    The first class interior is handcrafted in American Cherry, and varnished to a satin finish.
    The isolated moulding above the berths is lined in mahogany.
    Flooring of varnished teak plywood with holly inlay.
    Headlining of white vinyl covered panels with mahogany strips.
    Latex mattresses for master cabin with sprung slats
    Blue cloth upholstery in saloon – replaced 2017
    Laminate counters in galley
    2.10m headroom throughout interior

    Description of Accommodation from Forward:

    Forward Heads:
    Bulkheads and lockers in white laminate.
    Laminate soles.
    Wash basin and countertop in laminate
    Dedicated shower cubicle forward with hot & cold water supply
    Electric flush marine heads
    Cupboards above heads
    Ventilation through opening deck hatch

    Forward Cabin
    Large offset double berth to port.
    Stowage in shelves and lockers above and outboard to starboard.
    Stowage beneath berth
    Access to ensuite heads forwards
    Ventilation via opening deckhead hatch

    Main Saloon:
    Large U-shaped settee to port
    Lockers and shelf stowage outboard and forward
    Large fixed cherry wood dining table – new 2014
    Ample bookshelves and cupboards.
    Secondary chart table and additional stowage aft and ahead of aft heads.

    Navigation Station:
    The navigation area is located opposite main saloon on starboard side
    Large chart table areas fore and aft with swivel seat between
    Stowage for charts.
    Ample space for individual instrumentation and modern navigation equipment.

    The galley is located amidships starboard side.
    Large work areas in easily cleaned and durable laminates.
    Stowage for groceries.
    Cupboards with fiddles for plates, cups and glasses.
    Stainless steel crash bar

    Aft Heads:
    Aft of saloon to port.
    Manual marine heads

    Aft Shower:
    Aft of galley to starboard – used for storage of sailing gear with heater outlet
    Dedicated shower cubicle with hot & cold pressurised water supply

    Aft Cabins:
    Mirrored cabins to port and starboard
    Upper and lower bunks
    Hanging lockers
    Ensuite sinks
    Access to engine space

    Pilot House:
    Seating to port and starboard with cushions
    Chart counter to starboard
    Removable table
    Door access to aft cockpit


    Hall spars white painted aluminium alloy spars
    Keel-stepped mast with two sets of spreaders Spreader keel stepped mast.
    Full time cutter rig.
    Stainless steel wire standing rigging (2008 – lower shrouds and tongs replaced by Hall Spars - 2014)
    Profurl manual genoa and staysail furlers
    Ronstan ball-bearing battencars for fully-battened mainsail system
    Checkstays and jumper struts to stabilise rig in heavy seas and whilst using staysail
    Holmatro hydraulic backstay
    Rigid boom vang
    Adjustable mainsheet track on coachroof
    Bulwark mounted genoa tracks
    Coachroof mounted jib tracks
    Control lines led aft to cockpit jammers
    Mast-mounted white painted carbon-fibre pole for poling out genoa
    Line-tender for spinnaker track on mast

    Andersen winch package consisting of:
    2x 2-speed electric self-tailing primary winches in cockpit
    2x 2-speed manual self-tailing checkstay winches in cockpit
    2x 2-speed manual self-tailing control line winches in cockpit
    2x 2-speed manual self-tailing halyard winches on mast

    Rolly Tasker Sails - New 2013
    Dacron fully-battened mainsail 92.7 m²
    Dacron furling genoa: 88.4 m²
    Dacron furling Jib: 37,10 m²
    Dacron storm trysail: 14.9 m²
    Dacron storm jib: 13.5 m²

    Stainless pulpit and pushpit.
    Mid ship gates.
    Bow stern and mid ship cleats.
    Removable boarding ladder at stern.
    Aft radar tower
    Stainless steel aft gantry for bimini, solar panels and wind generator
    Teak grating for cockpit sole and inside pilot house – new 2014

    Anchoring & Mooring:
    70kg Rocna primary anchor with 80m of 13mm calibrated chain – New 2014 and both V4A stainless steel
    27kg & 15kg Plough secondary anchors
    Lewmar 24vDC capstan electric anchor windlass with remote control at foredeck
    Warps & Fenders – 3x inflatable Certec fenders 0.5m/1.8m - 2017
    Hook & moor

    Tender & Outboard:
    NAIAD 3.5m aluminium bottomed RIB tender registered in New Zealand as legal-liferaft - New 2013
    Dinghy carries 6-7 people with 30hp Yamaha outboard
    Tohatsu 3,5PS outboard engine - New 2013

    Leisure Equipment:
    2x 12l aluminium diving tanks INT – tested 2018, BCD, automatic, pressure and depth manometer – not warranted
    Various diving goggles and fins
    Paddleboard - 2019
    1x Kite Board 142 and 1x Kite Board 163
    2x 15 & 12 m2 Liquid Force NV Kite with bar. Div Harnesses, Jackets, Pumps etc.

    Covers, Cushions & Canvas:
    Grey acrylic canvas stackpack for mainsail with lazyjacks
    Blue acrylic canvas bimini
    Cockpit cushions


    Navigation Lights:
    LED Aqua Signal navigation lights.

    Life saving:
    Viking 8-man canister liferaft on cradle at aft end of cockpit – new 2016
    406Mhz EPIRB
    S4 SART
    2x horseshoe buoys with lights
    Danbuoy with light
    Jackstays along sidedecks
    8 tested and proofed life jackets with lights and personal AIS transmitters

    Fire control:
    Fire Pro automatic engine room fire extinguishing system
    Fire extinguishers throughout interior
    Additional fire extinguishers in lazarette storage space
    Fire blanket close to galley plus extinguisher for burning fat/oil.

    Lying Cruising Caribbean

    Available to view strictly by appointment

    Office Hours Mon- Fri 0900 – 17.00
    Saturday by prior appointment

    For more information or to arrange a viewing please contact us.

    Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.

    Tel: - Klicken Sie hier um die Telefonnummer zu sehen - Email: - Klicken Sie hier um eine Nachricht zu senden -
    ...Read full description
    ModellPerry 60
    Länge ü.A.18.26
    Kategoriefin keel
    Motor / Fabrikatyanmar 4lha-htp 160hp
    Motorlaufzeit (in Stunden)3100
    Anzahl Kabinen3
    Anzahl Kojen9

    More ads from this seller

    178.000 €
    Trockengewicht -
    Chioggia, Veneto, Italy
    450.000 €
    Anz. Motor(en) -
    Ibiza, Islas Baleares, Spain
    375.000 €
    Trockengewicht -
    1.086.443 €
    Anz. Motor(en) -
    Palma de Mallorca, Balearic Islands, Spain
    Grabau International
    Profile page