• Motor Boat
  • Sailboat
  • Inflatable & RIB
  • Engine
  • Small Boat
  • Jetboat and Jetski
  • Berth
  • Trailer
    All categories
    • All categories
    • Motor Boat
    • Sailboat
    • Inflatable & RIB
    • Engine
    • Small Boat
    • Jetboat and Jetski
    • Berth
    • Trailer
    Please select a location from the drop-down list
    £ 19,950VAT Incl. / Paid

    Achilles - 9m

    Add This Ad To Your Favorites
    This feature requires you to be logged on boatshop24

    You can login to your account or create a new account.
    Send this classified to a friend!
    Fill in the form below

    "Your name" must be filled.
    "Your email" must be filled.
    "friend name" must be filled.
    "friend email" must be filled.
    Please select the I'm not a robot box.
    your name:
    your email:
    friend name:
    friend email:

    Achilles 9m 1977 with extensive overhaul and updates between 2014/15 including brand new sails and rigging as well and overhaul of the engine in 2014. No expense spared and only high end products used on this stunning Yacht.

    Boat Specifications
    Builder: Butler Mouldings
    Designer: Chris Butler
    Length Overall: 30’ / 9.14m
    Length waterline: 25’6” / 7.77m
    Beam: 9’0” / 2.74m
    Draft: 5’6” / 1.68m
    Displacement: 3175 kgs
    “Sancerre” is a 9m Achilles FRP sailing boat with an iron fin keel and Bermudian rig. The topsides are painted blue and polished to a high shine, all deck equipment has been replaced and decks painted to good standard. She is freshly antifouled.
    The boat has a brand new Mainsail and Furling Genoa from Jeckells 2015 (used once).
    Old main and Genoa + older spinnaker and good (ish) cruising shoot
    Original deck gear replaced with new BARTON tracks and fittings. This includes the backstay system, genoa system, mainsheet system and vang as well as leading all lines aft with new clutches and two new halyard winches. Also has new floating winch handles on board.
    We also fitted a brand new forestay furling system from Hood Yacht Systems.
    Brand new Carbon Spinnaker Pole (Selden).
    New Halyards and sheets throughout 2014 – 2016.
    Sail Area
    No 1 (150%) 303.7 sq ft 28.2 sq m
    No 2 (130%) 273.3 sq ft 25.4 sq m
    No 3 (100%) 202.4 sq ft 18.8 sq m
    Main 161.7 sq ft 15 sq m
    Spinnaker 728.8 sq ft 67.7 sq m
    Theoretical hull speed 6.81 knots
    Yanmar 2GM20 16HP (1997) Taken out 2014, full service / paint /new engine mounts & teak chocks / new shaft / 3 bladed prop with rope cutter. (TS Marine).
    The boat was re-wired in 2012/2013. I also have the wiring drawings
    New waterproof Battery Charger system and shore power kit installed 2016. With std 230v socket for use when in shore power.
    Three new (sealed) deep cycle batteries fitted 2016.
    The fuel tank is soft, portside below the locker floor.
    Water tank is forward starboard below bunk
    Forward V berth
    Salon with two settee berth
    Quarter berth
    The fore hatch had replacement Perspex and new hinges.
    The old, bonded Perspex side windows were replaced with 6x 316SS custom made Port lights. (2x fixed and 4x opening).
    Some interior lights have been replaced
    The toilet and cooker were both new just before we bought the boat so around 2013.
    There is a water purifier fitted that will need new filters.
    The boat does have a saloon table and a navigators table but we felt both restricted space too much so removed them. They will go with the boat.
    The boat does have an Eberspächer diesel heater that needs servicing and hoses replacing. it is not currently in working order.
    Saloon / bunk covers replaced 2012 to a reasonable standard and it good condition. Fore cabin cushion covers are older
    Additional Information
    GPS, VHF and various other electronic instruments with it that have been working. However, I haven’t needed to use them and they would be on the list to replace. If I’m honest, don’t know their current working order.
    Two bulkhead compasses.
    Raymarine (tiller) autohelm.

    New electric bilge pump and auto switch fitted with one way inline valve 2016.
    Hand Bilge pump serviced 2016 with new diaphragm.

    Owners Comments
    We did have some considerable work done 2014 in repainting the hull and deck as well as rebuilding the skeg. The Rudder was also re-built in 2011 as it was a known problem for these boats. All sorted now.
    The keels been off 2003 (I believe), checked and refitted. The hull was epoxy primed recently but prior to our ownership.

    Brokers Comments
    Sancerre is a stunning yacht and I am waiting to get below to take some photos of the interior
    The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice
    £ 19,950
    Sales status:available
    Year built:1977
    Length (m):9.14
    Beam (m):0.84
    Engine manufacturer:yanmar
    KW:16.0 hp
    Model2gmModel Year1997
    Max Draft1.68 feet
    related sailboat ads:
    45 photos

    Camper Nicholson - 476

    Year built1985
    Length (m)14.33
    Weight dry -
    Sail area -
    1985 CAMPER & NICHOLSONS 476 AFT COCKPIT LAYOUT - PRICE NOW REDUCED TO £110, 000 One of only 12 ...
    Hunter - Channel 323 Bilge Keel
    37 photos

    Hunter - Channel 323 Bilge Keel

    Year built2002
    Length (m)9.80
    Weight dry -
    Sail area -
    'Nefertari' has to be the highest specified Hunter Channel 323 ever. Everything you need is on this ...
    £ 29,950
    31 photos

    Beneteau - OCEANIS 31

    Year built2008
    Length (m)9.66
    Weight dry -
    Sail area -
    Beneteau Oceanis 31, 2008 Deep fin keel, Yanmar 3YM20, 21hp, wheel steering, slab reefing main with ...
    7 ads
    member since 09.11.2016