Torbay Potter 19 for sale. A sturdy GRP workboat or general purpose day boat with GRP sheathed marine ply bulkheads and decks. Sealed side decks with central bilge section and removable deck boards. Oak bilge keels. Varnished Iroko gunwales. Teak decks fore and aft with oak Samson post. Teak capping on engine box. Gunmetal deck fittings and rudder pintles. Marine ply rudder with varnished Iroko cheek plates and GRP sheathed blade. KIPPER is an elegant open boat that will turn a few heads as she potters up and down the river or harbour but she is sturdy enough to be used as a workboat. She was built in South Devon to a traditional Torbay design and was commissioned by the current owner in 2006 and she was launched in 2007. She is currentl ashore near to our office at Noss on Dart Marina in Dartmouth.
Open day boat designed for a maximum of 6
Navigation Equipment: Echo sounder Anchoring and Mooring Equipment: 7.5 kg Bruce anchor Boathook 4 x fenders 4 x mooring warps General Equipment: 2 x cockpit lockers Tonneau cover Safety Equipment: Automatic bilge pump
Built in 2006 to a traditional Torbay design by Oxley Marine , in Brixham, Devon Launched 2007
GRP superstructure Teak deck foreward and aft Teak caping to engine box Tiller steering
Engine: Beta Marine 13.5 hp diesel engine Approximately 200 hours Sea water cooled Engine last serviced February 2018 Instrument panel with tachometer, hour meter, key start and electric stop Stainless steel propeller shaft Bronze stern tube Bronze propeller Electrical: 12v system 2 x batteries (in rear locker) Tankage: 1 x 40 litre fuel tank