• Motorni brodovi
  • Jedrilice
  • Gumenjaci
  • Brodski motori
  • Čamac
  • Jetski
  • Pristaništa i vezovi
  • Traileri
    Sve kategorije
    • Sve kategorije
    • Motorni brodovi
    • Jedrilice
    • Gumenjaci
    • Brodski motori
    • Čamac
    • Jetski
    • Pristaništa i vezovi
    • Traileri
    Na padajućem popisu odaberite lokaciju
    16.658 €
    Navedene cijene: £ 14,995VAT Incl. / Paid

    Cape Cutter 19

    Add To Favourites
    This feature requires you to be logged on boatshop24

    You can login to your account or create a new account.
    Send this classified to a friend!
    Fill in the form below

    "Your name" must be filled.
    "E-pošta" mora biti ispunjeno.
    "friend name" must be filled.
    "friend email" must be filled.
    Molimo izaberite "Nisam robot"
    your name:
    vaša e-adresa:
    friend name:
    friend email:

    Remarks :
    'Peninsula', a Cape Cutter 19 trailer-sailer with a gaff rig and good overnight accommodation; a real pocket cruiser.  Easily handled and with good performance, an ideal vessel for exploring creeks and rivers. With 4 berths and a roomy cockpit for her size, the Cape Cutter 19 is an ideal cruiser for couples, families and friends to get away. The large, self draining, sea kindly cockpit is dry and comfortable

    Accommodation :
    4 Berths in 1 Cabin

    With 4 berths and a roomy cockpit for her size, the Cape Cutter 19 is an ideal cruiser for couples, families and friends to get away. She has a full size V berth forward and 2 full length quarter berths aft. The quarter berths double as saloon seats. The galley area comprises space for a portable single burner stove 

    Inventory :
    Deck Equipment:
    Anchor, chain and warp
    Mooring warps
    2 x halyard jammers
    2 x winches
    1 x Furling gear (in/out)

    Safety equipment:
    A manual bilge pump is plumbed so as to draw from the bottom of the keelson & discharge from a bronze through hull fitting above the waterline.

    Single axle UK braked trailer

    Mechanical :
    Cape Cutter 19, built in 2003 by Cape Cutter Boat Builders South Africa to a design by Dudley Dix. The Cape Cutter 19 was developed by Nick & Lyndsay Voorhoeve. Their mission was to provide an outstanding classic yacht for sailing pleasure. The hull is hand laid up solid laminate, re-enforced to take to the ground with bilge runners to provide stability when drying out. The deck is hand laid up 10mm balsa core re-enforced with marine ply pads in load areas with a non-skid finish moulded into the walk areas. The interior is a stipple flow coated finish. The hull to deck joint is a biscuit tin type, and through bolted with 316 stainless steel bolts.

    Transom hung GRP rudder, balanced, with a lifting ash laminated wood tiller.
    Lifting keel - The centre-plate is a 20mm galvanised plate. The centre-plate system is fitted with a stainless steel wire strop to the stainless steel power winch. From the power winch an 8mm rope can be pulled from the cockpit working the 6 to 1 purchase
    Ballast - 300 kgs of lead ballast are installed in the full-length keel area as per design specifications. The centre-plate provides an additional 100 kgs ballast.

    Single Tohatsu 5hp 4-Stroke engine with remote fuel tank Mast & Rigging:-
    The spars are Douglas Fir. The main mast and spars comprise a hollow mast (with a hollow passageway for electrics), solid boom, gaff and bowsprit.
    5mm Stainless steel standing rigging
    Running rigging

    The Cape Cutter 19 boasts a high peaked gaff cutter rig. She is a lively performer due to her wide stern section, slippery underwater shape and large but manageable sail area. The light weight genoa provides for performance sailing in light airs whilst the heavier working jib (hank on) offers an efficient sail set in stronger winds. The cutter rig provides versatility and can be sailed with mainsail and one or two foresails flying. The Cape Cutter 19 can be easily single handed – all the sail handling can be managed from the cockpit as all lines lead aft.

    Mainsail with 2 reefing points
    Genoa with wire luff furling
    Staysail (hank on)

    16.658 €
    Prodajni status:available
    Model:Cape Cutter 19
    Godina proizvodnje:2003
    Beam (m):2.13
    Draft (m):0.3
    Kategorija:lifting keel
    Proizvođač motora:tohatsu 4-stroke
    No. of engines:1
    Konstrukcija korita:GRP
    Waterline length19 feet
    other adverts from this member: Network Yacht Brokers - CONWY
    11 photos

    Hardy Marine - Hardy Seawings 355 Elegance

    PodkategorijaMotorni brodovi
    Godina proizvodnje1997
    No. of engines2
    Remarks: 'Foxy III', a Hardy Seawings 355 Elegance sports cruiser, built in 1997. This twin ...
    14 photos

    Glastron - Glastron SX 175

    PodkategorijaMotorni brodovi
    Godina proizvodnje2006
    No. of engines1
    Remarks: The Glastron SX 175 is the company’s best selling boat and has a fantastic ...
    16 photos

    Myra-Plast 23

    PodkategorijaMotorni brodovi
    Godina proizvodnje1976
    No. of engines1
    Remarks: Sea Sport', a 1979 MYRA-plast 23 4 berth centre-cockpit cruiser / fishing boat ...
    7 photos

    Bootwerk Sea Angler 23

    PodkategorijaMotorni brodovi
    Godina proizvodnje2002
    No. of engines1
    Remarks: 'Goliath', a Sea Angler 23 built by Bootwerk (Netherlands) in 2002. This is one of ...
    Network Yacht Brokers - CONWY
    Network Yacht Brokers - CONWY
    57 ads