The smallest Fisher in the range, this Classic motorsailer is no less impressive than her larger sister yachts. With a surprisingly roomy interior and space for up to 4 berths, the quality of these traditional cruisers is unrivaled.
The star feature of the Fisher range has to be the wheelhouse, enabling you to sail in inclement weather in comfort.
With a modernised spec and a choice between a sloop or ketch rig, this sea-worthy yacht is capable of longer passages than you would expect at first glance.
New Build Guide Price List
STANDARD SLOOP - £87,000 + VAT - base boat excluding options
STANDARD KETCH - £90,000 + VAT - base boat excluding options
The hull is a heavy-duty hand-laid GRP moulding, which includes a clear gel coat underwater. The cast iron ballast is encapsulated in the GRP keel and glassed over with further laminates to form an integral part of the hull structure.
The deck is a heavy-duty hand-laid GRP moulding. Plywood stiffening is incorporated in all horizontal areas. Heavily stressed areas are additionally reinforced. The deck is bonded to the hull.
The bulkheads are laminated to the deck and hull resulting in a strong and integrated unit.
The cockpit is an integral part of the GRP deck moulding is self-draining through overboard drains.
A hatch is fitted in aft bulkhead to give access to stowage lockers.
A separate, drained gas locker is integral in the moulding in the starboard side of the seat.
Heavy double skin GRP bulwarks, incorporating the hull to deck joint, are an integral part of the deck and capped with 25mm thick teak. A teak rubbing strake and teak bulwark cladding are fitted. Teak is left treated with teak oil.
The hull and deck are moulded in white
Diesel fuel: A single stainless steel tank complete with baffles of approximately 182 litres (40 gallons), below the cockpit sole. A fuel contents gauge is fitted in the instrument panel. The tank is vented overboard.
Fresh Water: One flexible tank approximately 100 litres (22 gallons) under the forward bunk.
Black Water holding tank 90 litres.
Cold and Hot water is supplied by a pressure system to taps at the galley sink, toilet and external showers.
A manual bilge pump is fitted in the aft cockpit locker and is piped from the bilge sump to a hull discharge fitting.
Additional submersible electric pump fitted to engine room bilge.
All through-hull fittings are bronze and where below the waterline have seacocks or ball valves fitted.
Two two heavy-duty 12V batteries with isolator switches. On the port side of the engine room is a battery box.
Engine start x 1 Domestic system x 1, charging from the 125 Amp/Hr. engine driven alternator.
Cabin lighting:- Two berth lights in the fore cabin; one overhead light in the toilet; two overhead lights in the saloon; two reading lights; two overhead light in the wheel-house and the galley. All interior lighting LED.
Courtesy step lights and LED strip lighting fitted to interior. Deck courtesy exterior lighting fitted to gunwale sides and cockpit.
Navigation lights: Port & Starboard navigation lights fitted in teak shield boxes on wheelhouse; stern light fitted on the pushpit; masthead all-round white light and steaming light.
Electrical provision for fitting of VHF. and GPS.
Solar panels fitted to the coachroof feeding Lithium Ion Batteries and control system.
Stainless steel pulpit, pushpit and 6 stanchions with stainless steel wire (plastic sheathed) lifelines.
Heavy-duty stainless steel stemhead fitting incorporates forestay and headsail attachment points and anchor roller.
Large mooring cleat on the foredeck in specially reinforced area, two mooring cleats forward with fairleads and two bollards aft. Midship cleat fitted, headsail track through-bolted on the coaming.
Winches - 2 x Andersen sheet winches in the cockpit.
Spade anchor with 30metres 8mm calibrated chain fitted 30m rope/chain. Lewmar anchor electric winch.
Teak fore and aft handrails on the wheelhouse roof.
Teak grating on the cockpit sole
Two stainless steel Dorade ventilators and two mushroom type vents.
All the interior joinery is solid Ceylon teak and teak veneered plywood, galley and toilet top surfaces are in granite.
All cushions are upholstered in blue high-grade fire retardant fabrics. Teak parquet floor deck is fitted on all cabin soles and wheelhouse floor.
3 x Fenders
The Fisher 25 is built to conform with CE category B.
Hot & Cold water
Internal & external shower
Shore power 110v/240v
All lights LED- Power saving
Deisel Webasto Blown Air heating system 3 outlets.
Battery charger 12v 40 Amps
Vetus Bow thruster 35 KG/F
Lewmar Electric Anchor windlass
Electric Toilet with Macerator and 90litres Holding Tank
Vetus Sliding sunroof over the Wheel house.
Yanmar 3YM30 3 cylinder, naturally aspirated, diesel propulsion engine developing 30 HP at 3,600 rpm with a swept volume of 1123 cc is complete with reduction gearbox. The engine is freshwater cooled and fitted with a water-cooled exhaust with water lock type silencer. The engine is mounted on anti-vibration mounts secured to a steel reinforced GRP engine bed, which is bonded to the hull.
A bronze stern tube with water lubricated cutlass bearing is fitted carrying a 1 inch diameter stainless steel shaft driving a fixed 3 bladed bronze propeller. A zinc sacrificial anode is fitted to reduce stern gear corrosion.
The engine is situated below the wheelhouse with access via lifting hatches in the wheelhouse sole. The engine space is soundproofed.
Wheel steering from the wheelhouse is linked to the rudder by a Vetus Hydraulic steering system.
The rudder is a GRP moulding with bronze pintles and stainless steel tiller hood.
Teak Rudder stops.
Ketch Version, Selden aluminium masts & booms, Furlex genoa reefing system
1 x 19 stainless steel wire & Chrome on Bronze rigging screws.
Running rigging in pre-stretched braid line
Mainsail winches Andersen
Main, Mizzen and headsail in tan sailcloth, sail covers in tan cloth.