Melges IC37202111m

All sails from North Sails UK

2021 3Di Square Top Mainsail RAW 780

2021 J1 Light 3Di RAW 780
2021 J2 Med 3Di RAW 780
2021 J3 Heavy 3Di RAW 780

2021 A1.5 Superkote
2021 A2 Superkote
2021 A4 Superkote

2021 Code 0 NPL
2021 Spinnaker Staysail

INTERIOR & FIT OUT
Structural carbon reinforced grid
Gelcoat structural bulkheads
2 x Storage / seat modules amidships
Engine box with gas spring steps
Interior hull surfaces epoxy satin clear coat
Under deck surfaces epoxy satin clear coat
Textured composite covering walk surfaces amidships
Flush fasteners – companionway to forward hatch

PLUMBING
1 X Manual diaphragm bilge pump – below deck 3 x Electric bilge pump with extended pick up

Custom boom cover and rail pads.
Full cockpit covers.
Custom hardstand cradle suitable for shipping.

DECK GEAR BY HARKEN
Winches: Primary 2 x H 46.2PTP
Mainsheet 2 x H 46.2 STP
Pit 1 x H 40.2 STP
Backstay 2 x H 46.2 STP
Handles 4 x H B10HOT S/G
2 x H B8HOT S/G

Traveler track 6:1 cross-haul lead to trimmer
Transverse jib tracks: pin stop w / up/down purchase - Additional fully adjustable system also installed. Both options available.
3 Rope clutches Spinlock XTS0610/1c (main, jib halyard, tack)
Aluminum jib sheet fairleads
Black stainless steel stanchions and & pulpits
Life lines s/s 1 x 19 wire
Foredeck hatch Lewmar #65 Trapezoidal
Spinnaker dropline system (manual) with bow roller.

DECK HARDWARE
Stainless Steel chain plates
1.25 inch molded foredeck toe rail
Recessed plexiglass sliding hatch
Seadeck cockpit non-skid fitted. (5mm brushed)


UK non-class hardware upgrades;
Compass - Ritchie SR2
Mast 2:1 Halyard Padeye
Halyard Line 2:1
Spinlock Clutch upgrade
Harken 2nd Sheet Block x 2
Sheet Block Rigging Loops x 2
Tweaker Block Harken x 2
Tweaker Wichard Padeye x 2
Antal Hook x 2
Line for Tweaker x
Adjustable jib control system (in/out/up/down)


MECHANICAL
Yanmar 3YM20CE21 hp Diesel with SD 25 Saildrive
Gori 2- blade folding race prop
Molded 15-gallon fuel tank w/ deck fill
Primary fuel/water filter
Spinlock single lever throttle/clutch control

Electronics package
B&G VULCAN 7R NO XD
B&G WS 310 wind instrument pack
B&G Triton2 mast display x 4
B&G Triton2 cockpit display x 2
B&G ZG100 GPS Antenna with Integrated Compass and Heel sensor
B&G H3000 Speed Sensor Plastic Flanged Speed & depth transducer
5m Power Ethernet Cable
Onboard network with on deck Wifi
Isolated DC supply and circuit protection for instrumentation
Falmouth to Chichester Navionics Chart

DESIGN & ENGINEERING
Design: Mills Design No.102
CFD and VPP Analysis: KND Sailing Performance
Structural Engineering: SDK Structures
ISO 12215 ISAF Plan Approval
ISO 12217 Category A

STRUCTURE
Hull, Deck, Interior Grid / Gelcoat Surface
Multiaxial E-glass and uni-directional carbon fiber
Foam core with vacuum wet-preg epoxy resin
Secondary bonds hi-strength structural adhesive

KEEL AND RUDDER
Carbon keel fin with lead bulb
Race faired to class templates
Carbon rudder stock w/ blade faired to templates
Jeffa self-aligning rudder bearings top and bottom
Carbon tiller with an adjustable extension.

Additional IRC configured Keel fin and bulb - carbon fin 2.75m, with new bulb (-150kg from OD) - Currently installed.
IRC 2022 - 1.190
Custom upgraded AWLGRIP silver paint with clearcoat
White Durepox hull bottom finish on underwater surfaces.

SAIL DIMENSIONS
JIB 376.74 ft² 35 m²
MAINSAIL 522.05 ft² 48.5 m²
SPINNAKER 1,657.64 ft² 154 m²
SAIL AREA DOWN (EST) 2093.6 ft² 194.5 m²
SA / WEIGHT UPWIND 36
SA / WEIGHT DOWNWIND 76
I 50.68 ft 15.45 m
J 14.39 ft 4.39 m
P 48.51 ft 14.79 m
E 16.40 ft 5.00 m
STL 22.27 ft 6.79 m


MAST
Southern Spars carbon mast w/ regatta splice for easy transport.
2 sets of swept spreaders
Integral mast jack cylinder & hydraulic pump
Aluminum mainsail track for slides: full battens & slides
2:1 Main halyard exits below to Spinlock clutch on mast
Provision for 2 jib halyards – 1 halyard standard
Provision for 2 spinnaker halyards – 1 halyard standard
Additional upgrade - Alphalock internal jib halyard lock AM3IL. Reinforced mast tube with exterior patching.


BOOM
Southern Spars aluminum
16:1 outhaul lead to forward end of boom
Provision for single reef w/ Constrictor Clutch in boom (second reef optional)

SPRIT
Retractable carbon sprit
2:1 In /Out purchase lead to H-280 & H-150 Cams
Single tack-line lead to Spinlock XTS 0610/1C Clutch

STANDING RIGGING
S/S rod headstay & shrouds
2 X Dyneema topmast backstays 3:1 to winches

RUNNING RIGGING
1 x Main halyard, 2:1 lead to Spinlock rope clutch below deck
1 x Jib halyard standard (2nd option) w/ soft shackle
1 x Spinnaker halyard standard (2nd option) w/ soft shackle
1 x Mainsheet w / provision for continuous lead
2 x Jib sheets with soft shackles
2 x Spinnaker sheets w / soft shackles
1 x Spinnaker tack-line w / soft shackle
1 x Spinnaker retrieving line
2 x Traveller cross-haul 6:1 lead forward to main trimmer
2 x Jib pin stop cars
2 x Jib lead up / down
1 x Cunningham 6:1 lead to pit
1 x Quick Vang purchase lead aft to centerline of pit
1 x Outhaul, 16:1 lead to forward end of boom
1 x Jib Hobble Lead Aft
1 x Spinnaker Takedown System


Comprehensive running rigging package in place, with additional RACE hardware on top of standard specification;
Size 1 Harken carbo racing foil T
Tuff Luff Aero
Harken blocks - 2 x 2159 40mm carbo T2 ratchamatic
Harken blocks - 2 x 57mm aluminum double loop blocks
Harken blocks - 2 x HA2646 29mm air blocks, T2 air block\
Harken blocks - 2 x HA2646 40mm carbo block and becket cleat
BSI parts for Kevlar runners (custom T terminals made)
Allen Brothers - 2 x A-8739-10
Allen Brothers - 2 x A-8739-18
3 x sets of runner tails
Bobstay