Test Ne demande pas202425m

I : 29.86 ft
J : 8.53 ft
P : 31.50 ft
E : 11.98 ft

A one-design class is only possible thanks to the existence and initiative of owners? clubs and national or international organisations. The BENETEAU 25: complies with an ISAF (international) class rule.

Interior

• Companionway ladder aluminium
• Mast foot fitting
• Lifting ring
• Bench seat with cushions foam - cover PVC
• Chemical toilet position

RIGGING

• Anodised aluminium mast, necked in at head - 2 Cross tree levels.
• Standing rigging in single-strand stainless steel discontinuous
• Mast reinforced at foot and pole eye level.
• Spi pole eye - Boom aluminium anodised.
• Bearing sheaves on masthead.
• Anodised aluminium boom with Gooseneck and Fixing Kicking strap
• Socket fitting aluminium anodised with rubber waterproofing - collar tie rods
• Stainless steel shroud/lower shroud and back stay bolt plates - Stainless steel forestay plate on bow fitting
• Spinnaker halyard block with deflecters
• Bearing deck organisers for putting out foot and reef lines
• Bearing deck organisers for spinnaker and genoa halyards
• 4 strand foot trim with Harken pulleys
• 8: 1 boom down haul with Harken pulleys

RUNNING RIGGING

• 1 Main sheet with Harken pulleys
• 2 Genoa sheets
• Tackle - boom down haul with Harken pulleys
• Genoa and spinnaker barber ropes with Harken pulleys
• Mainsail foot and reef lines
• Genoa and mainsail Cunningham trim ropes
• Backstay trim tackle with Harken pulleys
• Rigging spinnaker : Halyard, sheets, kicker tackle and uphaul with Harken pulleys
• Genoa halyard
• Main halyard with cleat in mast foot (cable adjustment through Cunningham)

DECK FITTING

• 2 Rope pouches
• Mainsail Harken traveller track in cockpit bottom
• Mainsail Harken bearing pulleys
• Harken traveller track adjuster camcleats
• Cable adjustment main sheet on Harken turret
• Harken genoa sheet tracks with bearing car - Adjustable under tension
• Harken genoa sheet lead blocks for windward trim
• Cable adjustment kicking strap uphaul and spinnaker boom downhaul on *1 swivel camcleats type «Harken»
• Spinnaker and genoa barber haul fairleads
• Harken bearing blocks and camcleats for genoa barber haul
• Harken blocks and camcleat for spinnaker barber haul
• Cunningham blocks and trim camcleats for genoa to port and starboard
• Backstay tackle with trim camcleat to each side of cockpit
• Cunningham trim and foot tension camcleats on deck house
• 3 Horizontal lead blocks on deck house for lead trim handling
• Harken lead blocks and blocks/winch for spinnaker sheets
• Camcleats for genoa and spinnaker halyards

WINCHES

• 2 Winches Harken B16
• 2 Winch handles
• 2 winch handle boxes

La société offre les informations relatives à ce navire de bonne foi mais n'est pas en mesure de garantir l'exactitude de ces informations ni l'état du navire. Il revient à l'acheteur d'instruire ses agents ou ses experts afin de vérifier et de faire valider les informations de son choix. Ce navire est offert sous réserve d'une vente préalable