• Barche a motore
  • Barche a vela
  • Gommone
  • Motore
  • Imbarcazione piccola
  • Idrogetto
  • Posto barca
  • Carello
    Tutte le categorie
    • Tutte le categorie
    • Barche a motore
    • Barche a vela
    • Gommone
    • Motore
    • Imbarcazione piccola
    • Idrogetto
    • Posto barca
    • Carello
    Seleziona una località dal menu a tendina
    € 206.146
    Najad - 380
    1/45
    Se Yachts
    Profile page
    Annuncio rif. BS94009BF
    € 206.146
    Prezzo di listino: £ 185,000
    IVA incl.

    Najad - 380

    Barche a velaCruiserRiservatoNajad

    One of Najad's most successful yacht designs ever – the 380 is not only a well proportioned and beautiful looking yacht, but offers true ocean-going performance. With 2 owners from new she has been immaculately well maintained with a 'no expense' spared approach in her management and fit-out. Built using vacuum infusion, for a strong and ‘stiff’ hull, with an ample master cabin aft, a spacious saloon and fully equipped linear galley making life on board extremely comfortable. Quote from Sailing Magazine; "It was clear from the start that the Najad 380 is a nimble boat, even in light air, despite its nine-ton displacement and solid construction. The thing that strikes you is the sense that this boat has been overbuilt wherever possible."

    Cockpit
    Spacious cockpit with a large navigation table in unvarnished teak below a fixed windscreen. Seats and upper side of cockpit coaming covered in caulked, solid teak. Cupped Helmsman's seat with Najad logo in teak intarsia behind the wheel. Removable teak duckboards. Steering pedestal with stainless steel protection bar for the compass which also supports the varnished teak cockpit table. Two flush mounted winch handle pockets in the coamings port and starboard. The starboard one also contains the engine control panel. Behind the windscreen and in the cockpit recesses there is space for instrumentation. Integrated grab rails are built on to the teak navigation table in the cockpit. The sprayhood is fitted in a groove to the top edge of the windscreen so the joint becomes splash proof. The sprayhood offers a protected area at the forward end of the cockpit. Cockpit locker under the starboard seat for stowage of cockpit table, washboards and fire extinguisher. Below/behind the cockpit locker, space for the fuel tank. Manual bilge pump fitted so that it can be operated from the cockpit with all hatches closed. Two self-bailers and drains from the seats.
    Interior
    The first -class interior is handcrafted in selected and unstained African Mahogany, hand polished and varnished to a satin finish. Cupboards and doors with profile milled frames. The hull is insulated and lined with Mahogany ribs above berth bottoms. Soles of varnished teak plywood with holly inlay. Inspection hatches for the bilge and stowage. Headlining of white vinyl covered panels with Mahogany strips.
    Electrical systems
    12 volt, electric system. 4 x 110 Ah domestic gel batteries. 1 x 75 Ah engine battery. 12 volt/80 A alternator. Charging regulator for start and domestic batteries. The cables to a large extent run in conduits. Main switch panel with circuit breakers adjacent to chart table. Water and fuel meters, voltmeter. Two main switches for domestic and engine circuits, one is remote controlled. 4 x 12 volt socket outlets. All internal lighting fixtures are - LED.
    Comfort
    The L-shaped galley is located amidships allowing free passage between the cockpit and saloon. Separated from the saloon by a bulkhead with integrated grab rail. Stainless steel twin sinks. Pressure system with accumulator tank for hot and cold fresh water. Single lever tap for hot and cold water. Gimballed twin burner gas cooker with oven. Fixed gas pipes with remote controlled shut off valve between cooker and gas bottle. Work areas in a durable laminate that is easily cleaned. Well insulated ice box, 100 lt. incl. refrigeration unit and suspended baskets. Stowage area outboard of sinks. Storage cupboards for plates, cups and glasses, utilising peg boards to secure crockery. Cupboard under cooker for pans, etc. Waste basket fitting under sink. Drawers, one for cutlery. Opening porthole above cooker.
    Engine and Drive systems
    Yanmar 4JH4-E, 4-cylinder direct injection, 4- stroke marine diesel with fresh water-cooling. Power: 40.5 kW (54 h.p.) Mechanical reverse gear, type KM4A, reduction ratio 2.63:1. 1" (35 mm) propeller shaft in acid resistant steel with flexible connection. Stern gland with water lubricated rubber bearing. 3-blade folding propeller with shaft anode. Single lever engine control at the pedestal. Instrument panel fitted to starboard recess in cockpit including: Rev counter - Engine hour meter - Audible warning for oil pressure and engine temperature - Key starter - Electrical stop. Electrical starting motor, 1.2 kW. The engine is mounted on four rubber cushions for effective vibration damping. Wet exhaust with swan neck and effective rubber silencer. Well sound-insulated engine room. The engine is easily accessible for service through a door in the passageway and the removable companionway stairs. Separate fuel filter.
    Hull
    The hull is hand laid in a sandwich construction of triaxial Rowing with ISO polyester. The surface layer is of NGA Gelcoat for maximum protection against water penetration. The hull is top coated internally. Below the water line the hull is treated copper coated. The Keel has an epoxy primer below anti foul. An integral swimming platform with swimming and safety ladder in the transom. The internal construction of the yacht is reinforced with longitudinal stringers and transverse floors. This supports keel fittings, mast pillar, engine frame, tanks and the cabin floor. Additional fore and aft reinforcements (stringers) in the hull. All main bulkheads are laminated to the hull. Transverse chain plate fittings laminated to the hull. The mast pillar is bolted to the floor plate construction.
    Deck Construction
    Deck and coachroof are built in sandwich construction in glass fibre reinforced polyester. Hull and deck are bolt jointed together. Strengthened glass fibre laminate beneath stressed areas. Substantial teak capping. The deck and swimming platform are laid with solid caulked teak. The coachroof, both forward and aft, has a nonslip surface. A self draining locker forward for chain, fenders, warps and gas bottles. Aft, two drained lazarettes for anchor, ropes and lines. Two internal deck drains to avoid smears to topsides.
    Navigation
    Renewal with a full sweet of instruments including autopilot and radar, (2017,2018). The navigation area is located amidships to starboard forward of the heads, separated from the saloon by a bulkhead with an integrated grab rail. Forward facing navigation table with stowage for charts and drawers. Flexible chart lamp. Ample space for individual instrumentation and modern navigation equipment. Folding switchboard for easy access equipped with circuit breakers and fuses, also prepared for additional circuits.
    Mast and Rig
    Fractional rig with twin spreaders and twin lower shrouds. Seldon mast in silver anodised aluminium profile, height 51'7 "(15.75 m) above deck, stepped on the coachroof and supported by a steel pillar, that is placed on the floor plate construction. Stainless steel wire standing rigging. All new running rigging in cruising dyneema, (replaced 2019) Head sail furling system, Seldon Furlex, with control line on port side, drawn through blocks on the stanchions and stopper on the cap rail to outside cockpit. Backstay adjuster, mechanical. Seldon rod kick with gas damper and topping lift. The mast is fitted with deck light, steaming light and prepared for spinnaker equipment, one stainless steel, self-tailing halyard winch. Winch handle pocket on the mast, Windex and flag halyards. Stainless steel reefing winch. Stoppers to Genoa and main halyards. Internal main and jib halyards of stainless steel wire. Ample cleats. Stainless steel chain plates, bolted to transverse bulkheads, laminated on both sides to the hull. Seldon boom in silver anodised aluminium profile with internal outhaul and twin reefing lines with stoppers. Mainsheet to stainless steel sheet winch with ball bearing traveller and adjustable sheet point.
    Sails
    Mainsail and Working jib, North Nordac 3Di, (2018) Symmetrical Spinnaker The Working jib is delivered with telltales and sail bag.
    Additional Details
    Electrical bilge pump, capacity 8 m3/h. 4 x fire extinguishers. 2 x 2.75 kg gas bottles. Galvanic protection Heater
    2019
    The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
    ...Read full description
    CategoriaBarche a vela
    SottocategoriaCruiser
    Stato di venditaRiservato
    ProduttoreNajad
    Modello380
    Anno di costruzione2006
    Lunghezza11.51
    Larghezza3.66
    Lunghezza f.t.11.51
    CondizioneUsato
    VenditaCommerciante
    Produttore di motoreyanmar
    Motore54.0 hp
    Capacità carburante326 liter
    Acqua dolce401 liter
    Num. Cabine2
    Num. Letti4
    Num. Bagni1

    Similar barche a vela

    42
    € 133.660
    SottocategoriaCruiser
    Anno di costruzione2007
    Lunghezza13.93
    Peso a secco -
    Gosport, South East, United Kingdom
    55
    € 128.145
    SottocategoriaCruiser
    Anno di costruzione1994
    Lunghezza11.89
    Peso a secco -
    Lymington, South East, United Kingdom
    31
    € 83.517
    SottocategoriaCruiser
    Anno di costruzione2002
    Lunghezza13.94
    Peso a secco -
    Gosport, South East, United Kingdom
    Se Yachts
    Profile page