• Łódź motorowa
  • łódź żaglowa
  • ponton
  • motor
  • mała łódź
  • skuter wodny
  • miejsce cumowania
  • przyczepa
    Wszystkie kategorie
    • Wszystkie kategorie
    • Łódź motorowa
    • łódź żaglowa
    • ponton
    • motor
    • mała łódź
    • skuter wodny
    • miejsce cumowania
    • przyczepa
    Wybierz lokalizację z listy rozwijanej
    65.075 €
    CAB Yachts 170 Poling Flats Fisherman & Tender
    Pensacola Yacht Sales
    Profile page
    numer referencyjny BS343462B
    65.075 €
    Podana cena: $ 78,000

    CAB Yachts 170 Poling Flats Fisherman & Tender

    Łódź motorowaCAB Yachts 170 Poling Flats Fisherman & Tender20145.18
    Length 17’-0”, LOA 18’-4”
    Beam 7’-0” Draft 8” (engine up)/ 14” (engine down w/jack plate raised) Dry weight 870-1100 lbs. (minus engine) Max. weight cap. 2100 lbs.(engine and other) Swamped cap. 1800 lbs. Persons capacity 3 Freeboard Bow- 18”, Stern- 14"
    Construction Philippine Mahogany, with 3M 5200 bedding at ALL wood joints  .
                              *ALL wood sealed with 3-4 coats Smiths CPES.
                             - Frames 3/4” x 2-1/2” typ., Battens 5/8” x 1-1/2”
                             - Bottom - Inner bottom 1/4” marine plywood- bedded w/ 3M 5200 & fastened
                                             with silicone bronze screws.
                                          - Outer bottom 1/2” Philippine mahogany- bedded to Inner with
                                             3M 5200 & fastened with silicone bronze screws.
                           - Fasteners Carriage bolts and screws- all silicone bronze.
                         - Hull topsides/ transom planks 1/2” bedded in 3M 5200, faired, stained, 4    
                           coats Smiths CPES, 3 coats finish with Interlux Perfection Yacht Enamel,  
                           then polished.
                         - Fwd , Sides, & Aft decks 3/8” marine plywood, bedded with 3M 5200,  
                           faired, sealed in 3-4 coats Smiths CPES, 3 coats finish with Interlux
                           Perfection Yacht Enamel, then polished.
    Features  Standard power Single, Evinrude 60 E-Tec outboard marine engine.                      - 120v shore power connection/ switch and wiring throughout cabin.                         - Polished Stainless steel hardware, hinges, pop-up cleats, lights.                       - All thru- hull fittings are bronze and bedded in 3M 5200. Bronze stem band.                      - Electronic controls with fully backlit instrumentation. Stereo. Electric horn,                         fwd & aft bidge pumps, high water alarm. Bronze removable hull plug fwd.                      - Polished 316 stainless hull hardware, 316 polished stainless steel bow cleat.                      - Polished 316, 3/4” stainless steel fender rails.                      - 16g., 316 grade stainless steel poling tower, polished & passified.                       - Philippine mahogany console, stained, sealed, varnished (same process as                          topsides) with lockable storage and acrylic windshield, cup holders, surface                           storage bin, polished stainless steel tilt wheel, rod holders, tool holder.                       - Upholstered bench seat with flip- up mahogany lid with under seat                           storage area.                       - Range light and running lights.                      - Fwd lockable deck hatch in bow.                      - Aft lockable deck storage hatches at stern.                         -Skeg (outer Keel), sealed and bolted for replacement if damaged.                      - Philippine mahogany bumper/splash rail aft with 3/4” stainless steel rail cap                      - Polished Silver boot stripe.                      - Interlux 2000E Barrier Coat System on bottom up to boot stripe.                       - Philippine mahogany king plank, stained, sealed, varnished (same as
                             topsides finish).
                          - Furnished items (4) fenders with ropes, anchor, anchor line, (2) 20’ & (2)-                           15’ dock lines, integral chocks at bow, cleats, compass, (2) deep                          cycle12v batteries.                      - Teak lower cockpit decks.                      - LED lighting cockpit lights system.                      -20’ alum. twin end pole in black with vinyl protection sleeve.
     Bottom Sealed with 3 coats Smith’s CPES, Barrier Coat- Interlux 2000E.
                 - Bottom Paint- Pettit Vivid hard anti-fouling (blk)
     Topsides Hull Sealed with Smiths CPES (3 coats) and painted with Interlux Perfection  
                   Yacht Enamel.
                  * All finishes incorporate the “hot co at” method for lasting protection.              * All varnished wood is stained, sealed with 3 or more coats of Smith’s CPES,                and then varnished using “hot method” alternating Interlux Gold and Interlux                Schooner 96 with top coats polished to achieve a smooth, glossy, long lasting                  finish.
    Cockpit decks Teak- sealed, caulked seams and oiled with Interlux teak oil (3 coats)  
                   sloped to drain to bilge.
     Approved Accessories/ Options 
                 - Single, Evinrude 75 hp E- Tec outboard engine.
                 - 16g., 316 grade polished casting platform (removable & stowable under fwd
                 - Live well with pump and drain aft Port side.            
                 - Premium electronics package (nav., stereo, gps)
                 - Full breathable canvas Sunbrella tonneau cover.              - Engine brace shock for travel.              - Hydraulic Sport Trim Tabs- Bennett.              - Underwater LED Lighting Package.              - Custom tandem axle trailer- galvanized and painted.              - Extended 20 yr Limited Warranty with Annual Maintenance Contract.
     Base Price $78,000.00-$85,000.00 (varies based on power selections & accessories).
    LOA 18 ft 4 in
    Beam 7 ft 0 in
    Minimum Draft 0 ft 8 in
    Maximum Draft 1 ft 2 in
    Freeboard 1 ft 6 in
    Engine 1
    Engine Brand Evinrude
    Year Built 2013
    Engine Model E-Tec
    Engine Type Outboard
    Engine/Fuel Type Gas/Petrol
    Engine(s) Total Power 60 HP
    Seating Capacity 3
    The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice....Read full description
    ModelCAB Yachts 170 Poling Flats Fisherman & Tender
    Rok budowy2014
    Beam2,13 m
    Producent silnikaevinrude
    No. of engines1
    Konstrukcja kadłubawood

    Similar d motorowa

    15.226 €
    PodkategoriaŁódź motorowa
    Rok budowy2005
    No. of engines1
    Daphne, Alabama, United States
    21.859 €
    PodkategoriaŁódź motorowa
    Rok budowy1990
    No. of engines1
    Scottsboro, Alabama, United States
    66.327 €
    PodkategoriaŁódź motorowa
    Rok budowy2002
    No. of engines2
    Pensacola Yacht Sales
    Profile page